Intec PS2 LCD screen Mod

I found a controller at a junk shop for $5, and figured I would mod it onto a console. For the longest time I couldn't figure out how to add it to a console because I didn't know which cable was which. Now I figured it out: Orange: +12v (connects to a 7808 regulator so the voltage range should be greater and lesser than 12.) Black: Ground Brown: Ground Red: Right Audio input White: Left Audio input yellow: Composite video input Now I can finally build it into something. Maybe my new Sega Genesis 3, since it will fit right on the face of it and hopefully can share the same +10v power supply!

The Nintedno Gameboy Pocket's CPU pinout

I finally got around to probing the pins on the gameboy pocket's CPU and made a diagram. The CPU is not the same as the CPU inside of the original gameboy or the super gameboy SNES cartridge. When I get the chance, I will draw a schematic of the entire gameboy pocket.

Pinout photo direct link (huge): http://imageshack.com/a/img835/3936/nyix.png

1.  A0
2.  A1
3.  A2
4.  A3
5.  A4
6.  A5
7.  A6
8.  A7
9.  A8
10.  A9
11.  A10
12.  A11
13.  A12
14.  A13
15.  A14
16.  A15
17.  D0
18.  D1
19.  D2
20.  D3
21.  D4
22.  D5
23.  D6
24.  D7
25.  /RES
26.  VIN
27.  SO1
28.  SO2
29.  MD7
30.  MD6
31.  MD5
32.  GND
33.  MD4
34.  MD3
35.  MD2
36.  MD1
37.  MD0
38.  SOUT
39.  SCK
40.  SIN
41.  CPG
42.  CPL
43.  ST
44.  LD0
45.  LD1
46.  CP
47.  FR
48.  S
49.  MA0
50.  MA1
51.  MA2
52.  MA3
53.  VCC
54.  MA4
55.  MA5
56.  MA6
57.  MA7
58.  MA12
59.  /MCS
60.  MA10
61.  /MRD
62.  MA11
63.  MA9
64.  MA8
65.  /MWR
66.  CK2
67.  CK1
68.  P15
69.  P14
70.  P13
71.  P12
72.  GND
73.  P11
74.  P10
75.  GND
76.  GND
77.  CLOCK-OUT
78.   /WR
79.   /RD
80.   /CS

Some notes:

• The naming convention that I followed is directly from the silkscreen on the gameboy pocket itself. 
• It would seem that the gameboy pocket's CPU has the video RAM built-in as opposed to being on the PCB since the vram buses are all hanging open. Because of this, rewiring a DMG-01's CPU or a Super Gameboy CPU to the gameboy pocket is not immediately possible. 
•  The DMG and SGB CPU's have two pins named T1 and T2 which are tied to ground. I believe that pins 75 and 76 of the MGBCPU  are T1 and T2 respectively, but only because of their placement near the clock output. 
• The "/" means low-enable
• For more information what some of the pins do, see the photo near the top. Or comment below.